
Add to Cart
Plastic 8A Industrial Electric Heaters 950W Ntegrated Thermostat / Hygrostat
● Compact design
● Double insulated
● Integrated thermostat or hygrostat
The compact high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components.
The plastic enclosure provides double insulation and acts as protection against contact.
The fan heater is available with integrated thermostat or pre-set hygrostat for temperature or humidity control
The CR 030 was designed as a stationary unit for the bottom of the enclosure.
For wall fixing the fan heater CR 130 is resommended.
Heating element | High performance cartridge |
Temperature safety cut-out | to protect against overheating in case of fan failure,automatic reset |
Heater body | Extruded aluminium profile |
Axial fan, ball bearing | Airflow 160m3/h, free flow,service life 50,000h at25°C(77°F) |
Connection | 2-pole max. 2.5mm², clamping screw with strain relief, torque 0.8Nm max. |
Casing | plastic according to UL94 V-0, black |
Mounting | Screw fixing (M5) |
Fitting position | Hhorizontal |
Dimensions | 168 x 145 x 100mm |
Weight | Approx. 1.4kg |
Operating / Storage temperature | -45 to +70°C (-49 to +158°F) |
Protection type / Protection class | IP20 / II (double insulated) |
Note | Other heating capacities from 200W up available on request |
Operating temperature of heater with integrated hygrostat: 0 to +60°C(+32 to +140°F)
| ||||||||||||||||||||||||||||
according to UL 499, intended for the use within an enclosure in accordance with UL 508A |
Product picture
PS: If you can't find the exact type of your product.Please don't rush to go away.Contact me and your questions will be replied ASAP.Thank you for your time.