
Add to Cart
50 Watt Small Industrial Electric Heaters High Efficiency Doble Insulated
● Low surgace temperature
● Quick mounting due to clip fixing
● Doble insulated(plastic)
● Wide ovltage range
● Small size
● Integrated thermostat
Touch-safe heater for the use in enclosures with electrical/electronical components.
The design of the heater supports the natural convection which results in a high air-current of warm air.
The surface temperatures on the accessible side surfaces of he housing are kept down as a result of the heater design.
This model with plug-inthermostat does not require additional wiring.
The heaters are designed for perm-anent operation.
This heater is also available in a version without thermostat (CS 060).
Operating voltage | 120-240V AC/DC* (min. 110V, max. 265V) |
Heating capacity | See table |
Heater element | PTC resistor-temperature limiting |
Surface temperature | <80 °C(176 °F),except upper protective grille |
Connection | 4-pole terminal 2.5mm², torpue 0.8Nm max. |
Casing | Plastic according to UL94-V-0, black |
Mounting | Clip for 35mm DIN rail, EN 50022 |
Fitting position | Vertical |
Operating/Storage temperature | -20 to +70 °C (-4 to +158 °F) / -45 to +70 °C (-49 to +158 °F) |
Protection type/Protection class | IP20 / II (double insulated) |
Accessoires | VDE+UL File No.E15057 (according to UL499 in combination with UL508A) |
Note | Other voltages on request |
Operating with voltages below 140V AC/DC reduces heating performance by approx.10%
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1; ambient temperature - see Heating capacity / Ambient temperature diagram; |
PS: If you can't find the exact type of your product.Please don't rush to go away.Contact me and your questions will be replied ASAP.Thank you for your time.