YUEQING WINSTON ELECTRIC CO.,LTD.
Yueqing Winston Electric Co., Ltd Proximity sensor,switching power supply,voltage stabilizer,motor soft starter,frequency inverter,float switch,AC magnetic contactor, thermal overload relay, terminal
Add to Cart
HG140 Factory 15w Industrial Electric Heaters , Semiconductor Heater Various Watts IP20
Product Description
A fan heater is a heater that works by using a fan to pass air over a heat source (e.g. a heating element). This heats up the air, which then leaves the heater, warming up the surrounding room. They can heat an enclosed space such as a room faster than a heater without fan, but, like any fan, create audible noise.
1. Pressure clamp connectors
2. Dynamic heating up
3. Wide voltage range
4. Temperature limiting
5. Energy saving
6. Clip fixing
7. Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation.
Features
* aluminum profile heater body
* simplify installation
* PTC resistor, self regulating and temperature limiting
* Vertical Fitting
* High efficiency, long life and high reliability
* 2 years warranty
Technique parameter
| Operating voltage | 120-240V AC/DC* (min. 110V, max. 265V) |
| Heating element | PTC resistor - temperature limiting |
| Heater body | extruded aluminium profile, anodised |
| Connection | 3 pressure clamps for stranded wire 0.5-1.5mm⊃2; (with wire |
| end ferrule) and rigid wire 0.5- 2.5mm⊃2; | |
| Connection casing | plastic according to UL94 V-0, black |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type/Protection class | IP20 / I (earthed) |
| Approvals | |
| Accessoires | |
| Note | other voltages on request |
Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.Technical Data
| Art. No. | Heating capacity* | Inrush current max. | Pre-fuse T (time-delay) | Length (L) | Weight (approx.) |
| 14000.0-00 | 15W | 1.5A | 1A | 65mm | 0.3kg |
| 14001.0-00 | 30W | 3.0A | 2.5A | 65mm | 0.3kg |
| 14003.0-00 | 45W | 3.5A | 2.5A | 65mm | 0.3kg |
| 14005.0-00 | 60W | 2.5A | 2.5A | 140mm | 0.4kg |
| 14006.0-00 | 75W | 4.0A | 4A | 140mm | 0.5kg |
| 14007.0-00 | 100W | 4.5A | 4A | 140mm | 0.5kg |
| 14008.0-00 | 150W | 9.0A | 6.3A | 220mm | 0.7kg |
Product picture:
PS: If you can't find the exact type of your product.Please don't rush to go away.Contact me and your questions will be replied ASAP.Thank you for your time.