
Add to Cart
Aluminum 250W Switching Waterproof Power Supply Low Operation Temperature
Features:
1. Low-cost, high reliability
2. Coolong by free air convection
3. 100% full load burn-in test
4. Globally applicable AC input power
Specification:
Model | LPV-250-12 | LPV-250-24 | LPV-250-36 | LPV-250-48 | |
output | DC voltage | 12V | 24V | 36V | 48V |
Voltage tolerance | ±1% | ±1% | ±1% | ±1% | |
Rated current | 20A | 10A | 7A | 5A | |
Current range | 0~20A | 0~10A | 0~7A | 0~5A | |
Rated power | 240W | 240W | 252W | 240W | |
Ripple&noise | 150mvp-p | 200mvp-p | 200mvp-p | 240mvp-p | |
input | Voltage range | 180~264VAC,255~373VDC | |||
Frequency | 47~63HZ | ||||
AC current | 2.8A/230VAC | ||||
Efficiency | 82% | 84% | 85% | 86% | |
Inrush current | Cold start current 50A/230VAC | ||||
Leakage current | <3.5mA/240VAC | ||||
protection | Over load | Rated output power 105%~135%start over load protection | |||
Protection type:hiccup mode,auto-recovery after fault condition is removed | |||||
Over voltage | 15.6~17.8V | 30.6~33.2V | 42.6~44.2V | 54.8~56.6V | |
Protection type:hiccup mode,auto-recovery after fault condition is removed | |||||
Over temperature | Shell temp≥85°C,start over temperature protection | ||||
Protection mode:cutoff output,auto-recovery after temperature become normal | |||||
environment | Working temp,humidity | -10°C~+60°C,20%~90%RH | |||
Storage temp.humidity | -20°C~+85°C,10%~95%RH non condensing | ||||
Withstand vibration | 10~500HZ,2G 10min/1cycle,period for 60minutes,each axes | ||||
safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC | ||||
Fits | Safety standard | Fit UL1012,IP67 protect level | |||
tandard | EMC standard | Fit EN55022,CLASSA | |||
Others | Dimension | 235*120*56mm (L*W*H) | |||
Weight/packing | 2.55kg/9pcs/24kg/0.029 m⊃3;/1.04CUFT | ||||
Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | ||||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||||
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
Product Picture
Dimension
PS: If you can't find the exact type of your product.Please don't rush to go away.Contact me and your questions will be replied ASAP.Thank you for your time.