YUEQING WINSTON ELECTRIC CO.,LTD.
Yueqing Winston Electric Co., Ltd Proximity sensor,switching power supply,voltage stabilizer,motor soft starter,frequency inverter,float switch,AC magnetic contactor, thermal overload relay, terminal
Add to Cart
AC contactor belongs to modular controlling electrical equipment,which has novelty structure,compact size ,it is DIN-RAIL for installation,size of modular,modeling artistic.use of safety,direct acting inversion.And,it can install in the distribution boards along with breakers.
| WCT contactors-50Hz | |||||
| Raring(In) | Control voltage(V AC)(50Hz) | Consumption | Max. power | ||
| AC7a | Holding | Inrush | |||
| 4P | 25 A | 24 | 4.6 VA | 34 VA | 1.6 W |
| 220…240 | 4.6 VA | 34 VA | 1.6 W | ||
| Power circuit | ||
| Voltage Rating(Ue) 1P, 2P | 250VAC | |
| 3P, 4P | 400VAC | |
| Endurance(O-C) | ||
| Electrical | 100000 cycles | |
| Maximum number of switching operation a day | 100 | |
| Additional characteristics | ||
| Insulation voltage(Ui) | 500VAC | |
| Pollution degree | 2 | |
| Rated impulse withstand voltage(Uimp) | 2.5kV(4 kV for 12/24/48V AC) | |
| Degree of protection (IEC 60529) | Device only | IP20 |
| Device in modular enclosure | IP40 | |
| Tropicalization (IEC 60068-1) | Treatment 2(relative humidity 95% at 55℃) | |
* Confirm whether the product voltage, current, frequency and use category meet the requirements before use;
* Connect the control circuit first for no-load operation test and then connect the load in case of no abnormality;
* Regularly tighten the terminals and remove the deposited dust;
* Don't make the foreign matters fall into the product
